Duct cleaning is a rigorous procedure carried out systematically to ensure ducts are cleaned and functioning efficiently. A simple duct cleaning can be done at home, but it is ideal to have professional work on it for a more quality output.
Before the actual cleaning process, air duct cleaning begins with an inspection. Using a vacuum and a brush, dust, and debris are removed. It also includes the removal of droppings, bacteria, and mold. At the same time, cleaning includes the elimination of bad odors and sealing of leaks in the ductwork. If you are curious about how to do it or how professionals do duct cleaning, here is the answer.
Step 1: Prepare the Needed Tools and Supplies
All duct cleaners’ best friend is the vacuum cleaner. Duct cleaning tools and supplies are essential for a good cleaning process like cleaning cloths and brushes, screwdrivers, sealants, and cleaning solutions. Large HVAC systems, in particular, necessitate powerful ones.
Heavy-duty vacuums are excellent for maximum results, while truck-mounted vacuums are employed for larger properties in tight spots where the cleaner may not reach. Clothes and towels are used to clean and dry vent covers before screwing them back in place.
Sealants are very important in duct cleaning if there are leaks in the ductwork. You can use these to secure any ductwork sections as needed. Screwdrivers must loosen, remove covers, and gain access to some HVAC parts, and having them on hand is essential.
Step 2: Inspect The Condition of the Air Duct
A visual check is an initial step in the cleaning procedure. You can do an initial inspection if you have observed blockage or changes in your HVAC. You can do an initial inspection if you have observed blockage or changes in your HVAC. The service provider can assess how much cleaning your HVAC system requires based on the presence of mold, dust, and other material during the inspection.
Before the inspection, the air duct covers are unscrewed. Expert tidying is done following the visual inspection and determining the degree of cleaning.
Step 3: Loosen Up The Dust
Experts propose turning on the fan without the heat source to loosen up the dust before utilizing the vacuum. Then, turned off once the fan had run for a few minutes to get down to the next cleaning stage.
A negative pressure is created during this stage using a vacuum to collect all the dirt inside the ducts. The vacuum can also stir the dust that has adhered to the sides, releasing it and making cleaning easier.
Step 4: Collect All The Dirt From The Duct
A hand-held vacuum cleaner is utilized especially for remote HVAC systems. However, certified duct cleaners will use powerful vacuums that are usually truck-mounted and portable. When a vacuum cleaner isn’t enough to reach certain air ducts, specific instruments such as a brush are used.
If there is persistent dirt or particles in the ducts, the cleaner may need to cut holes and crawl inside to access these areas. The vacuum will then suction it up to the collection device.
Step 5: Tidy Up and Replace Other Duct Components
The rest of the ductworks, including the blower compartment, drain pans, and evaporator coils, should also be cleaned. Leaks may also be discovered during duct cleaning, and patching them should be done immediately to avoid high energy costs.
Filters and vent covers may also be inspected during this time and replaced if necessary to avoid a restricted airflow. This last-minute leak and replacement discoveries may only be identified if an expert duct cleaner checks the duct system.
Step 6: Return and Work on the Seals
Sealing can be done using mastic sealants to ensure air does not escape from the HVAC system. The last step in duct cleaning is to return all the vent covers and work on the seals. Also, before returning these external components, they should be vigorously cleaned for adhering to dust and particles.
When the seals and covers are returned properly, no air leaking will happen, then well-functioning air ducts can be achieved with lesser repair and utility bills.
Is Hiring A Professional Duct Cleaner a Must?
More people worldwide notice a difference in air quality when their air ducts are cleaned and wonder whether they can do it themselves or hire a professional. Air circulates and carries trash and dust from daily life via the air ducts of your home’s cooling and heating HVAC system. The furnace’s filter catches a lot of it, but remodeling projects, carelessness, or bad duct installation can cause the ductwork to building up gunk, jeopardizing your system’s effectiveness.
When you discover that more members of your family are developing allergies in one form or another, and you’ve ruled out all other likely causes, it’s time to clean the ducts. Of course, a professional cleaning service will be able to reach far deeper areas in the ducts more than you can do on your own.
Duct cleaning is best done by professionals, regardless of how good you are at other DIY jobs because they have the right instruments to get deep into the ducts. There are certified duct cleaning companies and set standards for air duct cleaning that you should contact when the need arises. Professional services will also aid homeowners who cannot make their repairs.
This provides homeowners with the certainty that their home’s air ducts will be cleaned to set standards and specifications with the appropriate instruments. Non-experts and amateur duct cleaners may do improper cleaning methods that may cost you structural damage expensive in the long run.
Because of this, many homeowners prefer hiring professionals to do duct cleaning. After all, when you want something as important as this done, you want to make sure it is done right. When you call a professional air duct cleaning company, you get the entire full-service cleaning of the best quality.